Room divider curtain – Using a curtain like room dividers is an efficient and affordable way to make a room for two. A curtain compartment can provide a movable soft barrier to privacy in a studio apartment. Or create two private units if you have two children in the same bedroom. You can hang a curtain compartment in minutes using a little hardware tool. To hang room divider curtain, starting by find out where and how high you are going to hang the curtain. With a pencil, marks the position of one end of the curtain rod on one wall.
Measure the distance from the mark to the ceiling. Measure the distance from the nearest perpendicular wall to the mark. Transfer measurements to the opposite wall and mark the position of the other end of the room divider curtain rod. Next, use a stud finder to find out if marks are placed over wall studs. If the marks are on a hollow part of the wall, drill a hole through the ground and set the wall anchorage before attaching the rod fasteners. If the marks are placed over the wall spikes, drill a small steering wheel through the ground. Place the socket-type rod holder on the wall. So that the central screw hole is aligned with the wall anchor or loose hole. Open part of the connector points upward.
12 Photos Gallery of: To Hang Room Divider Curtain
Use a screwdriver to turn the plug on the wall. Then, measure the distance between the walls on the level of the fasteners. Transfer the measurement to the cabinet bar. Mark the rod so that it will be cut 1/4 inch shorter between the fasteners distance. Use a saw to cut the rod. Try to hang the rod. Last, thread the room divider curtain on the rod. Place the ends of the rod down into the shelf fasteners.