Folding screen room divider – Large rooms do not always work well as they are. You either use the room for two different things. Or there is not enough wall space for everything you want to place. If you are in this situation, you can create a share wall of many things. Depending on your height requirements, shutters, louver doors, mirrors or plywood. These walls will not hold out the sound from the other side of the room. But they will block view or specify separate areas. Instructions to make folding screen room divider: Get enough louver doors to share your room.
Keep in mind that folding screen room divider doors must be at a slight angle when expanded so that the wall will stand up. Therefore, you get a few more doors than the length of the room. Lay two of the doors down so their long sides are apart. Attach two hinges to the doors to connect them. Place about 1 foot from the top and about 1 foot from the bottom. Make sure the hinges meet properly so that the doors will be able to close. Use a screwdriver and hinge hardware frame to connect the hinges. Next, start the doors. So that they face the other way and the hinges you just installed are now on the back of the other side. Place a third and fourth door on each side of the two doors that are already attached.
12 Photos Gallery of: Make Folding Screen Room Divider
Set hinges so that the third and fourth doors are attached to the original two doors. Place the hinges at the same distance from the top and the bottom as other hinges. Use a screwdriver to mount the hinges. Make sure they are facing so that the doors will be able to throw. Repeat the steps to turn the doors and add two more doors on each side, if necessary. It is best to have the folding partitions only half the length of the room and create a second panel for the other half. Fewer doors in one line, to become more stable. Tips and warnings to make folding screen room divider: Stability of higher panels. Consider connecting the end of the folding dividing line to the wall with solid hinges. For example, used for doors. Decorate panels of the dividing line by placing pictures in slats or stapling fabrics to the individual parts.